Cart Contents
Contact
Phone: 931-520-1831
Send us an email
Send us an email
Categories
- Common Spa Problems
- Hot Tub Spa Accessories
- Hot Tub Spa Pool Parts
- Tanning Bed Bulbs Lamps
- Tanning Bed Repair Parts
- Jetted Bath Tub Parts
- Repair Service Local Only
Sale Item
News
Product Details
|
C 5 Control System for hot tub spas
SKU: C-5-CONTROL
|
Overview
Introducing the United Spas C5 Control Series
- The beauty of the C5 control series is it’s simplicity.
- All the components from the relays to the fuses are located right on the board.
- This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board.
- With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics.
- The C5 has color coded receptacles and wiring so changing the voltage of a component is as easy.
- Complete control system!, All you need is a pump!!
- Includes topside control touch pad and bottom or top mount heater.
- A separate remote heater assembly is also avail for space limited installations.
- A gas heat model is also avail if needed to control your inground spa gas heater
- A topside adapter plate is avail for $8 to fill the void left from larger topsides, see photos
- Unit comes with pump 1 cord (2 speed) and light cord, other cords are $8 extra
- 120 volt setups need the 120v transformer, just swap it with the 240 one in the control.
- The standard unit will operate 120v pumps and such when connected to 240.
- Contact us with any questions
- The T5 Topside control comes standard with every C5 control system.
- It can can be programmed for almost any spa configuration.
- From a spa with a single pump and light, to a spa with a circulation pump
- Will operate 2 pumps, blower, ozone, fiber optics and a stereo.
- The T5 topside installs by drilling a 1-3/4" hole.
- Programming the T5 topside is simple and all done using the keypad.
- The T5 doesnt need a battery to remember its settings.
- On-board flash memory makes sure that once a topside is programmed, it stays.
- For 120 volt operation a 120 volt transformer will be required
- Unit comes w/ the 2 speed pump cord
- An extension plate is avail to fill holes left by larger topsides
- Contact us with ANY questions or help!!
- The C5 control is uniquely engineered to allow the unit to be used with almost any hardware configurations
- The C5 needs only be programmed from the topside upon install for whatever components it will be operating
- Changing the voltages of the different components is a snap as well
- Every receptacle is color-coded, and each neutral wire is striped with its receptacles color.
- Move the color coded neutral wire for the receptacle in question (at the power block) to convert voltages between 110V and 220V
Photos
Reviews
Add Your ReviewReviewer: s reel
12/10/2008 07:46am 
Thank you very much for being so helpful with our spa troubles. The control
system was easy to install, especially after you took time to give me a few
pointers. It worked perfectly the first time I powered it on. This control
system is a very well-done piece of equipment.
system was easy to install, especially after you took time to give me a few
pointers. It worked perfectly the first time I powered it on. This control
system is a very well-done piece of equipment.


