Series 3000 Pressure Switches
These switches are found in many spa applications where a durable switch is required.
They are rated at 25 amps and are available in a variety of mounting styles.

Single pole SPST contactors
120v or 240v coil , 25 amps
Common for pump relay or some heaters

"Baker Hydro/Marquis
Replacement element 4"" x 4"" flange element with gasket with circular bolt hole pattern for round manifold.
Use for Compak and Spa center.
Part # Description Length
47-394-1010 6kW/240v dual element 7"

Circuit Breaker-Potter Brumfield
Push thru- panel mount
Part # Description Manf. #
60-241-2000 3 amp, 120v W28XQ1A-3
60-241-2005 8 amp, 120v W28XQ1A-8
60-241-2010 15 amp, 120v W28XQ1A-15
60-241-2015 20 amp, 120v W28XQ1A-20

waterway cap style plumbing manifolds for hot tub spas
Some of these may be discontinued
Part # | Description | Manf. #
55-270-2100 Manifold, 1"s, (4) 1/2"s ports 672-4570
55-270-1570 Manifold, 1-1/2"s, (4) 1/2"s po

"Hi limit sensor, L series after 1997 451126 2"" bulb length, 5/16"" dia. 22"" wire length 4 wire, phone plug connector"

Sundance temperature sensor
SD6600-167 temp sensor has box end connectors
Fits all 400, 600, 600S, 700, 750, 800, 850, 1992 Suncoast, Suntub SV/DV.
12’ long cable with fitting
Replaces 6600-105, 6600-134, 6600-138 TEMPERATURE SENSORS

Available in straight nut, tee or 90 ellbow bodies.
Hole size 1-5/16"". Some items are no longer avil.
Chrome and brass covers avail for D

Hayward Union Adapter Assembly
Converts any standard union thread to the larger Hayward union thread.
This allows the installation of any pump wet end with standard union threads into a Hayward application.

Part # | Description | Manf

Pentair Pool Products
4-port manifold with (4) 3/8" barbs and 1"s x 1"spg inlet/outlet
Part # | Description | Manf. #
55-110-2060 Manifold 1"s/1"spg x (4) 3/8"b 53015700
55-110-2100 Barb cap 3/

Pentair Pool Products
16-port manifold with (16) 3/8" barbs and 1-1/ 2"s x 1-1/2"spg inlet/outlet
Part # | Description | Manf. #
55-110-2062 Manifold 1-1/2"s/1-12"spg x (16) 3/8"b 53015500
55-1

Temp sensor, L series after 1997 LX-LW500 1-5/8" bulb length, 3/8" dia. 84" wire length 4 wire, phone plug connector

waterway cap style plumbing manifolds for hot tub spas
Some of these may be discontinued
Part # | Description | Manf. #
55-270-1577 Manifold, 1-1/2"s, (6) 1/2"s ports 672-4120
55-270-2111 Manifold, 2"s, (6) 1/2&q

These are complete male and female unions
The self aligning type fittings have a taper type surface
Part # | Description | Manf. #
89-270-1016 Union assembly, 1"s x 1"s 400-2000
89-270-2080 Union assembly, 2"spg

Temp sensor, Gecko SSPA 9920-400262 2" bulb length, 3/8" dia. 10' wire length 2 wire, 4 pin connector

There are 48 and 56 frame models of these wet ends
They also make a 2-1/2 inch suction model
If the front fitting is larger than the other then you need the 2-1/2 inch model
See photo tab for example

Jacuzzi J Series wet end kit
This is a kit that has all parts needed but is NOT assembled
.75 HP is part # 34-105-1050
1.0 HP is part # 34-105-1053
1.5 Hp is part # 34-105-1056
2.0 HP is part # 34-105-1059

Can be used t

CB Control System Standard Features:

• Self-Standing Control
• T5 Digital Topside
• 2 Speed 1st Pump Ready w/ Cord
• 1 Speed 2nd Pump Ready
• Circ. Pump Ready
• Blower Ready
• 12v Spa Light Ready w/ Cord

Aquatherm/ Hydro-Quip
Black ABS housing no holes drilled.
Supplied with cover, O-ring, Hi Limit reset rivet, union fittings.
Found on Aquatherm, Sunwave and Hydro-Quip CM4000
Part # Description Manf. #
47-355-1075 Manifold kit

Hercules
20-00423
Stainless steel replacement heater assembly
Replaces the pre-95 XT 2" x 18" manifold.
Includes 5.5 kW/240v element.
Order tailpieces separately.
Part # Description
46-371-1221 Heater asse

Waterway center discharge wet ends were some of the most common used
Found mainly on older spas today $85.00

"1"" Air Controls from Waterway"

balboa Topside Adapter Plates
All adapter plates have an outside dimension of 8-9/16 x 3-1/2
They come with a peel off adhesive backing
These are used when the old spa side was larger than the new spa side.

Quick Plastic is a hand mixed 2 part epoxy.
Fast setting epoxy putty that bonds to all major plastic types except polyolefins.