Introducing the United Spas C5 Control Series

• The beauty of the C5 control series is it’s simplicity.
• All the components from the relays to the fuses are located right on the board.
• This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board.
• With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics.
• The C5 has color coded receptacles and wiring so changing the voltage of a component is as easy.

• Complete control system!, All you need is a pump!!
• Includes topside control touch pad and bottom or top mount heater.
• A separate remote heater assembly is also avail for space limited installations.
• A gas heat model is also avail if needed to control your inground spa gas heater
• A topside adapter plate is avail for $8 to fill the void left from larger topsides, see photos
• Unit comes with pump 1 cord (2 speed) and light cord, other cords are $8 extra
• 120 volt setups need the 120v transformer, just swap it with the 240 one in the control.
• The standard unit will operate 120v pumps and such when connected to 240.
• Contact us with any questions

• The T5 Topside control comes standard with every C5 control system. 
• It can can be programmed for almost any spa's configuration.
• From a spa with a single pump and light, to a spa with a circulation pump
• Will operate 2 pumps, blower, ozone, fiber optics and a stereo.
• The T5 topside installs by drilling a 1-3/4" hole.
• Programming the T5 topside is simple and all done using the keypad.
• The T5 doesn't need a battery to remember it's settings.
• On-board flash memory makes sure that once a topside is programmed, it stays.

• For 120 volt operation a 120 volt transformer will be required
• Unit comes w/ the 2 speed pump cord
• An extension plate is avail to fill holes left by larger topsides
• Contact us with ANY questions or help!!